spanning_tree

Use this context to configure the spanning trees on FlexSwitch

Usage

leaf3sean(config)#spanning_tree brg_vlan 100
leaf3sean(config-stp)#

Settings

Context Description
brg_vlan 1-4095 Each bridge is associated with a domain. Typically this domain is represented as the vlan; The default domain is typically 1
enable UP/DOWN Administrative state of STPD, default: UP

Sub-Context (config-stp)

Context Description
enable UP/DOWN Administrative state of STP Bridge default: UP
forward_delay 0-30 The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of MaxAge. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds. Default: 15
hello_time 0-2 The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds. Default: 2
max_age 0-40 The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of HelloTime. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds. Default: 20
priority 0-65535 The value of the write-able portion of the Bridge ID i.e. the first two octets of the 8 octet long Bridge ID. The other last 6 octets of the Bridge ID are given by the value of Address. On bridges supporting IEEE 802.1t or IEEE 802.1w permissible values are 0-61440 in steps of 4096. Extended Priority is enabled when the lower 12 bits are set using the Bridges VLAN id. Default: 32768
tx_hold_count 0-10 Configures the number of BPDUs that can be sent before pausing for 1 second. Default: 6